11
4
120.01
4B00005
LH
0
CORESTLH
9
0
500
95069990
-8--11-
ACCESSORIES for Bows > Rest
4
• Horizontal and vertical movement without any fixation screw. The rest can be adjusted without loosening or tightening any screw!
• Highest precision, thanks to a revolutionary concept: the rest can be adjusted without tolerances and play, with a precision not known until today.
• Re-produceable settings: both the vertical and the horizontal millimetric scale have a Vernier scale (like a caliper). Thanks to that, the Rest can be
adjusted with a precision of 0,2mm! The setting can be reproduced, resulting in the arrow rest to have zero play.- the launcher can be set in 2
different angles - 30° or 35° - by changing two little blocks. So the angles can be re-set precisely.
• Guidance plates with bulge: plates with different lengths can be installed on top and bottom of the launcher. These will change the stiffness of the
launcher and avoid any oscillation after the shot, which most of the time is the reason of bad clearance. The bulge on the plates gives the launcher
the chance to follow the horizontal path of the arrow leaving the bow.
• Stainless steel 5/16“-24 screw with flat head and large diameter. The Spacer made out of a special plastic allows to fix the screw better. A counter
screw with an elastomer pad avoids any marking on the bow handle.
• Different launcher sizes and thicknesses will be available to fit various arrow diameters and weights.
• the profile of the arrow rests mounting block may not fit every handle (at the moment the Hoyt Carbon Matrix is the only bow not accepting the rest)
• Includes:
1 Beiter Compound Rest with 2 launchers, including 2 inclination blocks (30°, 35°)
1 hex wrench for horizontal and vertical settings
1 stainless steel screw 5/16“-24 with spacer and a counter screw with elastomer pad
1 set of guidance plates with bulge: 22, 26, 30mm
Rest
Compound Rest LH - Black
Compound Rest - LH - Black - Beiter - - -
11
4
4.24
4B00006
BOTH
0
9
0
50
95069990
-8--11-
ACCESSORIES for Bows > Rest
4
Rest
Launcher 5mm 0,30mm
Launcher 5mm - 0,30mm - Beiter - - -
45
4
9.61
9B0000A
Plastic
BOTH
0
RIPCLUTCH43
9
0
350
95069990
-8--45-
ACCESSORIES for Bows > More Stuff
9
One part is screwed onto your work bench, the other attaches to your stabilizer bushing
• Connect the two together to hold your bow at an angle
The best easy way to put your bow in a rapid rack or to work on it in safety.
More Stuff
RIP CLUTCH Black
RIP CLUTCH - Black - Beiter - - -
37
4
48.45
BL80022SW
6B00001
0
BL80022SW
9
0
350
95069990
-8--10--37-
ACCESSORIES for Bows > Stabilizer > Offset, Side Mounts & V-Bar
6
NEW Beiter-Lock V-BAR with
2 Conical Adapter 26/22mm
to attach on the bow with your classic screw OR buying the 27mm V-lock connector for the Long stabilizer
Offset, Side Mounts & V-Bar
V-Bar - Beiter-Lock 80°x0°, Black, Beiter-Lock 26/22
V-Bar - Beiter-Lock - 80°x0°, Black, Beiter-Lock 26/22 - Beiter - - BL80022SW -
37
4
23.97
BLAD12SA22
6B00003
0
BLAD12SA22
9
0
250
95069990
-8--10--37-
ACCESSORIES for Bows > Stabilizer > Offset, Side Mounts & V-Bar
6
NEW Beiter-Lock Adapter for V-BAR, complete, 26/22 2Pc 24,7 1 49,4
2Conical Adapter 26/22mm and Thread Adapter 12mm
12mm is short, not good for V-bar or Offset, but perfect for a single stabilizer
Offset, Side Mounts & V-Bar
V-Lock Adapter complete, 26/22mm, 12mm
V-Lock - Adapter complete, 26/22mm, 12mm - Beiter - - BLAD12SA22 -
45
4
6.84
XB00002
0
KL632A25SWSW
9
0
150
95069990
-8--45-
ACCESSORIES for Bows > More Stuff
9
The Beiter Klicker has been used and appreciated since its introduction, thanks to the fact that it suits almost all Handles on the market, due to the different available models.
Different colours of the Klicker Blade and many different components can individually adapt the Klicker to the archer's needs.
More Stuff
Clicker, 6-32A 0,25mm, BLACK BLADE
Clicker, 6-32A - 0,25mm, BLACK BLADE - Beiter - - -
24
duplicated by 18650
4
12.61
NO451X57
NB0001F
0
NO451X57
9
0
50
95069990
-2--24-
ARROWS > Nocks
N
This is the new nock fopr X10 Recurve.
This new nock is the classic Out Nock, but can fit on an X10 with Pin.
The lenght is the same of the 4.5 Out for x10, so no change on clicker lenght.
Is a good option if your shaft is a little "soft" during tuning.
Nocks
Nock 4.5/1 X (x25) Heavy Green #57
Nock 4.5/1 X (x25) - Heavy Green #57 - Beiter - - NO451X57 - duplicated by 18650
24
4
15.52
NB0000A
0
NO0X121
9
0
50
95069990
-2--24-
ARROWS > Nocks
N
Nock made for Easton X10 (all spine), but no for Easton X10 Protour.
ONLY HEAVY COLOURS (no transparent)
Nocks
Nock In-Out 0X1 (x25) Yellow#21
Nock In-Out 0X1 (x25) - Yellow#21 - Beiter - - -
54
4
59.87
9B00004
0
PL6523.0DB
9
0
150
95069990
-8--54-
ACCESSORIES for Bows > Plunger
9
The Beiter Plunger, developed 1985 to 1986, was introduced at the Las Vegas Shoot 1987. Actually it is represented on archery fields world wide.
Since 1992 all Olympic Medallists used Beiter Plungers as well as over 80% of all competing archers!
The Beiter Plunger is produced out of precision machined parts (the Beiter company supplies the watch-, precision-mechanic- and medical industry and is used to work only with the finest materials).
The notching scale cylinder allows an exact and reproducible spring tension time after time.
The thread cylinder is made out of high-grade refined steel, the springs out of stainless harmonic steel, the notching scale cylinder and the slotted nut out of anodised aluminum. The material used for the Plunger Pin offers excellent glide- and wear-behaviour by using aluminum-, aluminum-carbon- or carbon-arrows.
Plunger
Plunger, 5/16"-24 17.5-23.0mm, Darkblue
Plunger, 5/16"-24 - 17.5-23.0mm, Darkblue - Beiter - - -
24
4
15.52
NB00007
0
PINH61
9
0
50
95069990
-2--24-
ARROWS > Nocks
N
Nocks
Pin Nock Symmetric Hunter (x25) Black #61
Pin Nock Symmetric Hunter (x25) - Black #61 - Beiter - - -
35
4
16.73
HB00003
0
WIBL
9
0
120
95069990
-35-
ACCESSORIES for Archers
H
The Beiter winder was developed in several years of testing. One of the aims, was to design an efficient tool to be easily used by professionals or beginners.Not only it is important that a serving tool simply serves the yarn on a string: it is much more important, HOW this is done! The yarn must have a smooth guidance; friction and tension must be adjusted extremely fine. This is possible thanks to the Beiter WINDER. A unique feature of the Beiter WINDER is also that the yarn must not be threaded through an eye: thanks to an innovative slot you have only to clip in the yarn! Another unique property of the Beiter Winder is that you can change the spool within seconds.
ACCESSORIES for Archers
Winder Blue
Winder - Blue - Beiter - - -
47
4
67.38
2B00003
Plastic
RH
0
SC39RSW075RTRT
9
0
300
95069990
-8--47-
ACCESSORIES for Bows > Scope
2
Level Red, Frame-Kit Red
Scope
Scope Ø39 Black, +0,75
Scope Ø39 - Black, +0,75 - Beiter - - -
35
4
2.58
HB00002
0
SERVINGCLIP
9
0
100
95069990
-35-
ACCESSORIES for Archers
H
ACCESSORIES for Archers
Serving Shifter #2 & Tool Clip
Serving Shifter - #2 & Tool Clip - Beiter - - -
47
4
7.38
2B0000W
Plastic
BOTH
0
VT88SW
9
0
300
95069990
-8--47-
ACCESSORIES for Bows > Scope
2
The Beiter rECURVE Sight Tunnel 08mm was the first Sight Tunnel designed by Werner Beiter.
It can be combined with seven interchangeable inserts - all showing different aiming options
With the aid of the Sight-Pin Tool the inserts can easily be replaced.
Pack Includes:
Sight Tunnel
1 Sight Pin Tool
1 Insert #2 Red
1 Insert #5 Black
Available in: 8/32
Scope
Sight-Tunnel diam. 8mm, #8-32, Black
Sight-Tunnel - diam. 8mm, #8-32, Black - Beiter - - -
35
4
2.98
HB00001
0
STRINGCLIP
9
0
100
95069990
-35-
ACCESSORIES for Archers
H
ACCESSORIES for Archers
String&Clip Tool #1, Black, 9,5mm
String&Clip Tool - #1, Black, 9,5mm - Beiter - - -
35
4
17.43
HB00004
0
TL7503BL
9
0
250
95069990
-35-
ACCESSORIES for Archers
H
The Historic Tri liner from Beiter helped since 90' years, generation of archers to find the good place to attach the Spin Wing Vanes.
Easy, Durable and Light, is easy to bring on the field.
ACCESSORIES for Archers
Tri-Liner Blue
Tri-Liner - Blue - Beiter - - -
35
4
0.98
HB00005
0
NO7705H
9
0
100
95069990
-35-
ACCESSORIES for Archers
H
ACCESSORIES for Archers
Push'n'Pull for Hunter-Nock
Push'n'Pull - for Hunter-Nock - Beiter - - -
35
duplicated by 10906
4
1.06
HB00008
0
NO77132OR
9
0
100
95069990
-35-
ACCESSORIES for Archers
H
ACCESSORIES for Archers
Nockdepot for #2 Nocks Orange
Nockdepot for #2 Nocks - Orange - Beiter - - - duplicated by 10906
35
4
1.06
HB00006
0
NO7713HGR
9
0
100
95069990
-35-
ACCESSORIES for Archers
H
ACCESSORIES for Archers
Nockdepot for Hunter Nocks Darkgreen
Nockdepot for Hunter Nocks - Darkgreen - Beiter - - -
49
4
2.63
2B00005
0
SCEWW7GR
9
0
150
95069990
-8--47--49-
ACCESSORIES for Bows > Scope > Scope accessories
2
Scope accessories
Level Ø7mm for Scope 39 Green
Level Ø7mm for Scope 39 - Green - Beiter - - -
35
4
2.70
HB00007
0
WA0401GE
9
0
100
95069990
-35-
ACCESSORIES for Archers
H
ACCESSORIES for Archers
Limb Line Gauge for Recurve Yellow pairs
Limb Line Gauge for Recurve - Yellow pairs - Beiter - - -
24
4
11.00
NB0000P
0
NO192H10
9
0
50
95069990
-2--24-
ARROWS > Nocks
N
Nocks
Nock 19/2 Hunter (x25) Red #10
Nock 19/2 Hunter (x25) - Red #10 - Beiter - - -
49
4
2.63
2B00004
0
SCEWW6721RT
9
0
150
95069990
-8--47--49-
ACCESSORIES for Bows > Scope > Scope accessories
2
Scope accessories
Level for Scope Ø29 Red
Level for Scope Ø29 - Red - Beiter - - -
49
4
2.25
2B0000A
0
SC7716FKRT
9
0
150
95069990
-8--47--49-
ACCESSORIES for Bows > Scope > Scope accessories
2
Scope accessories
Rings for Scope Pin Red 1each .Ø8/Ø6 , Ø10/Ø8 , Ø12/Ø10
Rings for Scope Pin - Red 1each .Ø8/Ø6 , Ø10/Ø8 , Ø12/Ø10 - Beiter - - -
47
4
61.82
2B00001
Plastic
RH
0
SC10RSW075KGRKL
9
0
300
95069990
-8--47-
ACCESSORIES for Bows > Scope
2
The Beiter Scope Ø29 Standard was the first product Werner Beiter designed specially for Compound archers. The Beiter Scope Ø29 Standard is equipped with a convex/concave ZEISS Silicate (Glass) lens.
Due to the use of a Glass Lens the Beiter Scope Ø29 Standard is the cheapest alternative for a Compound archer to shoot a ZEISS lens, known over the world to be one of the best manufacturer for optics worldwide. Beiter is the only manufaturer using original ZEISS lenses for all their Scopes!
The Beiter Scope-Body is made out of high quality plastic; it is injected and engaged directly on a steel-thread.
The Beiter Scope Ø29 Standard can be ordered in following options:
Scope-Body, RH or LH,
Thread #10-32 or #8-32
Colour: Clear, Black, Red and Green
extra-coated convex/concave Silicate Lens (Glass) made by ZEISS, Ø29mm available in following doptries (approx.magnification): +0,25 (2X), +0,50 (4X), +0,75 (6X), +1,00 (8X), +1,25 (10X)
Level in Holder: Green/Clear, Red/Clear or Blue/Clear
Thread Ring Clear with Crosshair, Hole-Ø1,5mm
Fluor Pin Ø1,5/1,5mm, Red
Scope Tool
O-Ring for Lens
One important factor for many archers to choose the Beiter Scopes is the large choice of available aiming options.
Different Shields for Level, Scope Pins, Thread-Rings with different hole sizes, Fluor-Pin and Sight Inserts are easily exchangeable and available in different colours, and can be individually adapted, to meet the your individual needs!
Green/Clear Level
Scope
Scope 29 K-Lens #10-32, Black, +0,75
Scope 29 K-Lens - #10-32, Black, +0,75 - Beiter - - -
49
4
5.41
2B00006
0
SC7677FKRT
9
0
150
95069990
-8--47--49-
ACCESSORIES for Bows > Scope > Scope accessories
2
Scope accessories
Scope Pin Colour-Kit Red
Scope Pin Colour-Kit - Red - Beiter - - -
49
duplicated by 10878
4
3.63
2B0000E
0
SCWSSW
9
0
50
95069990
-8--47--49-
ACCESSORIES for Bows > Scope > Scope accessories
2
This is one of the most selled Product by Beiter.
Is a very easy to install Weather Shield, good for Sun or Rain.
Is easy to install on scope 29mm, is very elastic .
Scope accessories
Weathershield Black for 29mm
Weathershield - Black for 29mm - Beiter - - - duplicated by 10878
10
4
28.14
3B00004
12
0
CE12G5SWPE
9
0
2000
95069990
-8--10-
ACCESSORIES for Bows > Stabilizer
3
Stabilizer
Centralizer 12", Weightadapter 5/16", "Black Pearl"
Centralizer - 12", Weightadapter 5/16", "Black Pearl" - Beiter - - -
11
4
4.24
4B00004
BOTH
0
CO4030
9
0
25
95069990
-8--11-
ACCESSORIES for Bows > Rest
4
Rest
Launcher 4mm 0,30mm
Launcher 4mm - 0,30mm - Beiter - - -
46
4
17.82
3B00006
0
VBOX
9
0
100
95069990
-8--10--46-
ACCESSORIES for Bows > Stabilizer > Damper
3
The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors.
Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.
Damper
V-BOX Basic Kit, incl. Membrane #1, #3, #5, #7
V-BOX - Basic Kit, incl. Membrane #1, #3, #5, #7 - Beiter - - -
24
4
15.52
NB0000K
0
NO0X271
9
0
50
95069990
-2--24-
ARROWS > Nocks
N
Nocks
Nock In-Out 0X2 (x25) White #71
Nock In-Out 0X2 (x25) - White #71 - Beiter - - -